2011 Chevrolet Silverado Heavy-Duty Facelift Debuts in Chicago
2011 Chevrolet Silverado Heavy-Duty Facelift – 10.02.2010
Chevy introduced the facelifted 2011 Chevrolet Silverado Heavy-Duty at the Chicago Auto Show this week. The truck’s new exterior features include a sleeker front chrome bumper, power dome-style hood, and new grille.
According to statements from the automaker, the engineering and design teams focused on 11 different points to improve the vehicle. Changes include rebuilt frames that are now stiffer than they had been. The new frames support as much as 16,000 lbs, with the new front suspension supporting as much as 6,000 lbs on the front axle. Remodeled, wider leaf-spring rear suspension can take another 6,200 to 7,050 pounds with single wheel configuration, or a much stronger 9,375 pounds with dual rear-wheels, a 14% improvement. The truck is capable of towing 16k lbs on a ball hitch, or 20,000 lbs with a fifth-wheel.
Also retuned is the diesel 6.6-liter Duramax engine estimated to be stronger and more powerful with reduced emissions. The result is a 0-60mph time of under nine seconds. Larger brakes, exhaust braking, and an improved ride round out the package along with more safety features and a more comfortable cab.
The 2011 Chevrolet Silverado 2500HD and 3500HD will hit the market this summer. You can read more about the vehicle in the press release below.
Press Release (Click to expand)
2011 Chevrolet Silverado Heavy-Duty Trucks At A Glance
Segment-best towing (20,000 lb / 9,072 kg) and payload (6,335 lb / 2,873 kg) supported by all-new frames and strong suspensions for maximum capability
Class-leading torque, class-leading fuel economy with up to 63-percent lower emissions and quicker acceleration with new 6.6L Duramax diesel mated to new Allison 1000 six-speed automatic transmission
B20 biodiesel capable
All-new exhaust brake system for greater feeling of control and reduced brake pad wear
Comprehensive set of confidence- and control-related features, including trailer sway control, integrated trailer brake control, hill start assist, automatic grade braking and intelligent brake assist
Bold and new exterior design features louvered hood, front bumper, grille and 20-inch wheels
Extended cab models feature 170-degree-opening rear access doors for unobstructed access to the interior
Purposeful technology, including available mobile WiFi, USB connectivity, Bluetooth connectivity, XM Satellite Radio, OnStar 9.0 and navigation
Goes on sale this summer
BRING IT ON – 11 WAYS THE NEW 2011 CHEVROLET SILVERADO HEAVY-DUTY TRUCKS PROVE THEY’RE READY FOR ANY JOB OR COMPETITOR
CHICAGO – On a recent validation drive of the new, 2011 Chevrolet Silverado heavy-duty trucks, engineer Brent Deep towed a 20,000-pound (9,072 kg) trailer for 245 miles (400 km) along I-70 between Denver and Grand Junction, Colo. – and he barely touched the brakes the entire way.
Deep relied on the Silverado’s new, smart exhaust brake system to slow the truck/trailer combination on descents, helping prove the new system is suitable for the most demanding conditions. It was a drive across the heart of the Rocky Mountains and some of the interstate system’s steepest grades, with altitudes ranging from Denver’s approximately 5,000 feet (1,525 m) to more than 11,100 feet (3,400 m) at the Eisenhower Tunnel.
“It takes some courage to leave your foot off the brake, but the Silverado’s Duramax engine and Allison transmission perform the task with smoothness and confidence that really impresses,” said Deep. “Better still, the exhaust brake system can help extend brake pad life and help avoid overheating the brakes on long descents.”
The exhaust brake system feature is just one of the elements that makes the new 2011 Silverado 2500HD and 3500HD models the most capable in the industry. They go on sale this summer.
“We sought the input of our customers during the development of the 2011 Silverado HD to deliver a truck that meets or exceeds their every need,” said Jim Campbell, Chevrolet general manager. “It offers greater strength and capability – including class-leading fuel economy, trailering and payload ratings – and has more power, accelerates quicker and has lower emissions. That sounds like the very definition of no compromises.”
The Silverado heavy-duty lineup is broader than ever, with 11 2500HD models and eight single- and dual-rear-wheel 3500HD models – including a new 3500HD Crew Cab with a 6.5-foot cargo box. WT, LT and LTZ trim levels are offered, and popular features such as the EZ Lift tailgate and rearview camera system return. All models bring greater capability, improved ride and handling and a greater feeling of driver control. Depending on the model:
Segment-best fifth-wheel towing capacity of 20,000 pounds (9,072 kg)
Segment-best conventional towing capacity increases up to 23 percent, with a maximum of 16,000 pounds (7,272 kg)
Segment-best payload capability of 6,335 pounds (2,873 kg) on a complete vehicle
Segment-best Gross Combined Weight Rating increases to 27,500 pounds (12,500 kg)
Gross Vehicle Weight Ratings increases up to 17 percent to 13,000 pounds (5,909 kg)
Front Axle Weight Rating increases by up to 25 percent to 6,000 pounds (2,721 kg)
Snow plow capability is now enabled for all 4WD cab configurations
There are also enhanced powertrains, including a new Duramax 6.6L diesel/Allison 1000 six-speed transmission that offers the exhaust brake system, new front and rear suspensions, an improved brake system, hill start assist, trailer sway control system and more.
“Along with all their heavy-duty equipment, these trucks are designed to be stylish and refined, inside and out,” said Campbell. “We paid close attention to all the details, giving them a distinctive, muscular appearance on the exterior and a well-appointed interior with the comfort, convenience and safety features customers appreciate.”
Outside, the 2011 Silverado 2500HD and 3500HD models are distinguished by a power dome-style hood with a new, louvered design, as well as a new grille and full-width chrome steel front bumper. A new lineup of 17-, 18- and 20-inch wheel/tire combinations is featured, too (20-inch polished forged aluminum wheels are available on 2500HD).
Designers and engineers left almost no bolt unturned during the comprehensive redesign of the trucks. Here are 11 key elements that demonstrate the 2011 Silverado 2500HD and 3500HD are ready for any job and any competitor:
1. New frames
In the quest to comprehensively redesign the Silverado HD chassis to improve durability and ride, while also supporting increased capability, engineers developed 11 all-new, fully boxed frame assemblies. The frames have increased cross sections and use more high-strength steel for greater durability, higher towing capacity and improved ride and handling; the front sections are hydroformed.
The bending and beaming stiffness of the frames is increased 92 percent and 20 percent, respectively, with the fully boxed sections enhancing torsional stiffness by a factor of five. Also, larger engine and transmission mounts, coupled with a 125-percent-stiffer front frame structure, provide greater vibration control, while hydraulic body mounts are incorporated under the cab section on extended and crew cab models for a more isolated feel inside.
Engineers addressed common customer and aftermarket uses when designing the new frames, including adding access holes to the rear frame section to enable easier installation of fifth-wheel/gooseneck-style hitches. Also, the frame-mounted hitch for conventional trailering is stronger, with a box-tube design. It supports up to 16,000 pounds (7,257 kg).
2. New and strong independent front suspension
A completely redesigned independent front suspension system offers up to a 25-percent greater front axle weight rating – up to 6,000 pounds (2,721 kg) front gross axle weight rating (FGAWR) – enabling a snow plow to be used on all 4WD cab configurations with the available snow plow prep package, while also supporting improved ride and handling characteristics.
Silverado’s signature short-long arm/torsion bar front suspension design is retained, but now features new, forged steel upper control arms that are stronger and lighter than their predecessors. The new lower control arms are made of precision-machined cast iron to handle the greater loads. Five different torsion bar rates support five different front gross axle weight ratings (a single torsion bar was previously used for all models). This helps stabilize the range of trim heights of various models under load, while enhancing appearance, handling, durability, tire wear and alignment. The trim height is adjusted on each bar via a single bolt, easily allowing the height to be changed to account for the weight of a snow plow or other accessories.
The Silverado HD front suspension now uses a pair of urethane jounce bumpers on each side, instead of one, for improved load management; and there’s a new upper shock mount attachment design that’s positively connected to the frame with two fasteners. This design eliminates squeaks and clunks, while supporting higher load capability and increased durability.
Compared to competitors’ beam-axle front suspension, the Silverado’s independent front suspension provides a better ride, more accurate trim height control (with fewer parts) and greater flexibility to adjust the alignment for weight and tire sensitivity.
3. New asymmetrical leaf-spring rear suspension
Commensurate with the Silverado HD’s greater strength and capability is a rear suspension designed to support greater loads. It features a new, larger asymmetrical leaf-spring design that also contributes to improved ride and handling characteristics.
The asymmetrical design is derived from unequal front and rear spring half lengths, which minimize axle hop and enhance traction control efficiency. 2500HD models feature a two-stage leaf-spring design, while 3500HD models have a three-stage design. All models feature 3-inch-wide (76 mm) leaf springs that are 20-percent wider than previous models.
The larger leaf-spring design supports increased rear gross axle weight ratings across the board. On the 2500HD models, the rating is 6,200 pounds (2,818 kg) – up from 6,084 (2,765). On 3500HD models, the rating increases to 7,050 pounds (3,204 kg) on single-rear-wheel models and 9,375 pounds (4,261 kg) on dual-rear-wheel models – the latter representing a nearly 14-percent increase over the previous 8,200-pound (3,727 kg) rating.
4. Segment-leading towing and payload capability
Stronger frames, suspension systems with greater weight ratings and enhanced powertrain systems contribute to the Silverado HD’s class-leading towing and payload capability. The specifications charts included below outline capacities for each model and/or configuration, but here are the key facts:
The maximum conventional (ball hitch) towing rating increases to 16,000 pounds (7,257 kg)
A Silverado 3500HD crew cab/long box can tow up to 20,000 pounds (9,091 kg) with a fifth-wheel hitch. The 2010 Ram 3500 has a maximum rating of 17,600 pounds (8,000 kg) and the 2010 Ford F-350 is rated at a maximum of 18,800 pounds (8,545 kg). It should be noted that while Ford claimed segment-leading trailering and payload during its recent announcement of the 2011 Super Duty models, no towing ratings were issued
The maximum payload (3500HD) is 6,335 pounds (2,873 kg) – that’s nearly 11 percent greater than the 2010 Ford F-350’s 5,730-pound (2,604 kg) rating and about 24 percent more than the 2010 Ram 3500’s 5,130-pound (2,331 kg) ratings. Again, while claiming segment-leading payload for the 2011 Super Duty models, Ford did not announce the ratings
5. New 6.6L Duramax diesel and Allison 1000 six-speed combination
Helping the new 2011 Silverado HD trucks deliver their best-in-class capabilities is a new version of the workhorse Duramax 6.6L diesel and Allison 1000 six-speed automatic transmission powertrain combination. The Duramax 6.6L is more powerful and durable and the Allison 1000 is stronger and helps enable new features, including the exhaust brake system. Together, this improved version of a proven combination is also expected to deliver segment-best fuel economy.
The Duramax 6.6L’s new and improved features include:
Horsepower and torque expected to top previous model (testing is ongoing – check media.gm.com for updates)
NOx emissions reduced at least 63 percent over 2010 models
Quieter operation
High-pressure (30,000 psi/2,000 bar) Piezo-actuated fuel system for greater fuel efficiency, improved performance and reduced emissions
Exhaust brake system that enables controlled vehicle slowdown on downhill grades without actuating the brakes
Selective catalytic reduction after-treatment system using diesel exhaust fluid (DEF) injection to provide the best overall diesel characteristics and performance – with a range of about 5,000 miles (8,000 km) between DEF refills
Combustion and after-treatment have been optimized to provide about 700 miles (1,125 km) between diesel particulate filter regenerations – a 75-percent improvement over the previous system and significant contributor to improved fuel efficiency, as the regeneration process requires additional fuel
B20 biodiesel capability for an alternative fueling option
Internal revisions that improve durability
With nearly 1.3 million Duramax 6.6L engines produced since 2000, they have proven exceptionally durable and dependable. The internal elements that helped build its reputation are enhanced for 2011, including:
Main bearings’ profiles changed to enhance oil film thickness
Oil pump flow increased for increased pressure at low speeds
The turbocharger’s oil circuit is changed to provide increased pressure at the turbo and faster oil delivery
The connecting rods’ pin ends are modified to provide increased piston support
New, higher-strength piston design that eliminates bushings to provide lower reciprocating weight
An EGR cooler bypass reduces high-mileage soot deposits in the cooler and EGR circuit
The enhanced Allison 1000 for 2011 is strengthened to handle the higher torque capability of the new 6.6L Duramax engine, while also helping improve fuel economy and provide seamless assistance with a new exhaust brake system. Greater efficiency is delivered through reduced “spin loss” – meaning, the transmission channels more of the engine’s power to the axles, allowing it to do more with less fuel.
The Allison 1000 also features driver shift control with tap up/tap down shifting and a patented elevated idle mode cab warm-up feature. Also, the tow/haul mode reduces shift cycling for better control and improved cooling when towing or hauling heavy loads. The six-speed configuration retains its two overdrive gears for optimal efficiency.
Performance with the Duramax/Allison combination is also improved over previous models, with preliminary testing showing 0-60 mph times of less than 9 seconds and quarter-mile times of less than 16 seconds in 2500HD models. That’s about 0.3-second and 0.5-second quicker, respectively, than previous models.
6. Strengthened Vortec 6.0L/Hydra-Matic 6L90 six-speed powertrain
The venerable Vortec 6.0L gas V-8 with variable valve timing returns to the new heavy-duty trucks, along with a strengthened version of the Hydra-Matic 6L90 six-speed automatic transmission. This combination delivers excellent performance and efficiency, with a greater emphasis on low-rpm power.
A new camshaft profile in the Vortec 6.0L helps the engine produce more torque lower in the rpm band, for improved launch feel and a greater feeling of overall performance at higher altitudes and when towing a trailer.
The 6L90 is enhanced for greater strength, smoothness and quietness via:
Adding four attachment bosses to the transfer case adapter (4WD models) for increased strength and smoother, quieter performance
Increasing the cross section size of the transfer case adapter for greater strength
Adding a new, stronger output shaft
Adding a new heat shield and vent hose
7. Exhaust brake system
A new feature on Duramax-equipped models is an exhaust brake system. This driver-selectable feature uses the turbine control of the variable geometry turbocharger and the compression of the engine to generate backpressure, slowing the vehicle without applying the brakes. It is a smart system integrated with the cruise control feature and varies the braking to account for the grade and vehicle load.
The exhaust brake system allows for virtually effortless driving and towing, with seamless and quiet operation. It also helps prolong brake life and prevents overheating the brakes on long, downhill grades.
8. Large brakes
Brake feel and performance is greatly improved with the 2011 Silverado HD trucks. The standard four-wheel disc system is completely revamped to deliver smoother, more immediate and confident-feeling performance. Four-wheel, four-channel ABS is standard on all single-rear-wheel models and a three-channel system is standard on dual-rear-wheel models.
The front and rear rotors are larger in diameter – 14 inches (355 mm) – and width on all models to support their increased capacity, weight ratings and trailering ratings, while the calipers are stiffer and stronger. The hydroboost brake booster calibration is revised for reduced pedal effort and the travel of the pedal is also revised for a more comfortable, confident feel.
Larger wheel hub and bearing assemblies complement the new brake system and the rear rotors attach to the wheel hubs for easier servicing.
9. Refined and capable ride, handling and steering
Longer wheelbases – ranging from 133.6 inches (3,395 mm) to 167.7 inches (4,259 mm) – and wider front/rear tracks enhance the ride and handling characteristics of the Silverado 2500HD and 3500HD, giving them a greater feeling of smoothness and control.
The longer wheelbases and wider tracks are complemented by the new, stiffer frames, new jounce bumpers, shock mounts and hydraulic body mounts to provide a solid, smooth and isolated driving experience. New shocks were specially valved to support the new trucks’ weight ratings, while balancing excellent ride characteristics.
Also enhancing the driving experience is a revised steering system designed to support the trucks’ greater front gross axle weight rating. It includes a new, larger steering gear, power steering pumps and linkages. The pumps (different parts for gas and diesel models) deliver greater pressure for reduced steering effort in low-speed and parking maneuvers; they are also quieter. On some models, the new linkages feature a compliant joint added at the pitman attachment to enhance handling.
10. Comprehensive safety and functional technology
The 2011 Silverado 2500HD and 3500HD models have a comprehensive roster of safety features and functional technologies that include:
StabiliTrak electronic stability control system on all single-rear-wheel models
Larger, four-wheel disc brakes with standard four-wheel ABS
A new high-strength steel tubular frame cross member that enhances safety and improves crashworthiness
Seat pelvic/thorax and head curtain side air bags available on 2500HD
Available rear backup camera
Segment-exclusive OnStar 9.0
Trailer sway control system on all single-rear-wheel models
Hill start assist (standard on single-rear-wheel models)
Trailer sway control system provides an added measure of confidence when towing a trailer. The system senses conditions of trailer sway and intervenes with braking and/or reduced engine power to bring the trailer under control and keep it on its intended path. The system will use electric trailer brakes when a trailer is plugged into the standard wiring harness of the truck and its performance requires no input from the driver.
The hill start assist system is automatically engaged when sensors detect the vehicle is on grade of about 5 percent or greater. It holds the brakes for about 1.5 seconds or until the gas pedal is pressed, preventing rollback – it is particularly effective when towing, giving the driver time to switch from the brake pedal to the gas pedal without rolling.
11. Lives bigger, drives better, works harder
From the available remote starting feature to the unimpeded access offered by the 170-degree-opening rear access doors on extended cab models, the 2011 Silverado HD models live bigger, drive better and work harder. The interiors are refined, with improved quietness and attention to detail, but designed for working. Numerous storage compartments provide covered access for everything from work gloves to laptops.
Indeed, for many owners the Silverado HDs are mobile workspaces, offering mobile WiFi, USB connectivity, Bluetooth connectivity, XM Satellite Radio and a navigation system. Multiple charge points enable multiple electronic devices to operate simultaneously; and when equipped with the available navigation system, XM NavTraffic offers real-time updates of traffic conditions (in selected areas) that can help plan the most effective route to the job site.
Cold-weather customers will appreciate the Duramax 6.6L’s quick, reliable start-up, with a starting time on par with gas engines. Its glow plug cycle time is the segment’s best in all temperatures, taking no more than 3 seconds in temperatures as low as -20 F (-29 C). There’s also a cab heat-up feature that allows the engine to idle faster in low temperatures to warm up the interior faster.
And when you’re on the road, the Silverado HDs take you farther without stopping. A new, 36-gallon (136 L) fuel tank is standard on all models and, with the improved fuel efficiency of the powertrains, enables a cruising range of up about 680 miles (1,090 km) with the Duramax 6.6L. That’s the equivalent of a trip from Houston to Oklahoma City and back to Dallas on a single tank.
Finally, all 2011 Silverado 2500HD and 3500HD trucks work under the best warranty coverage in America – five-year/100,000-mile limited powertrain warranty, plus roadside assistance, courtesy transportation and other features that provide assurance that Chevrolet backs its trucks confidently.
2012 IndyCar Race Car Design Proposals by Swift Engineering
2012 IndyCar Race Car DEsign Proposals by Swift Engineering – 11.02.2010
California-based race car designers Swift Engineering have released their proposals for the 2012 IZOD IndyCar Series vehicle. The Dallara IndyCar chassis is now scheduled to be retired at the end of the 2011 series after nine years of service.
Officials with IRL need a car capable of hitting 235 mph (378 km/h), at a much lower cost than the Dallara’s $400k pricetag. The reduced cost will be an effort by IRL to allow teams to focus more on their drivers and marketing, while a new car could help restore interest in the beleaguered series.
Aside from the new car, IRL will also be examining proposals for a new engine. Currently, the series requires use of a naturally-aspirated 3.5-liter 32-valve DOHC V8 made from aluminum alloy. Honda produces the engine, often criticised as sounding harsh and abrasive, with McLaren providing the engine management system.
Swift is in serious competition for the IndyCar bid. Other designs are being proposed by Dallara, Lola, and newcomers DeltaWing. For this car, Swift’s partners include Cray, Mark One Composites, and Cruden America.
“Individually, each one of these partnerships is critical to Swift’s continuing commitment to motorsport,” said Swift chief Jan Wesley Refsdal. “However, collectively and in conjunction with one another they will help us set new industry standards in innovative design, manufacturing and support.”
Source: paddocktalk.com via jalopnik.com
Press Release (Click to expand)
San Clemente, California – USA February 2010
American race car company, Swift Engineering, Inc. is proud to announce key motorsport partnerships with industry leading companies to further its bid to design and build the next generation race car chassis for the 2012 IZOD IndyCar Series ®.
“Given Swift is the leading US race car design and manufacturing company and our 27-year history was founded in motorsport, it is only natural that we aspire to partner with the nations’ premier open-wheel formula, the IZOD IndyCar Series,” Jan Wesley Refsdal, Swift’s president said.
Key business alliances have been cemented between Swift and Cray Inc. (The Supercomputer Company), Indianapolis-based Mark One Composites, Inc. and Cruden America, world leaders in motion racing simulators
“Individually, each one of these partnerships is critical to Swift’s continuing commitment to motorsport; however, collectively and in conjunction with one another they will help us set new industry standards in innovative design, manufacturing and support,” Refsdal stated.
Swift’s strategic industry partnerships were carefully selected and cultivated through a focused effort to realize the challenge the IZOD IndyCar Series has set for its next generation car.
Cray supercomputers will be used at Swift’s facility to further enhance its capabilities in Computational Fluid Dynamics (CFD), an important tool in the design and development of aerodynamic concepts. In conjunction with Swift’s existing on-site wind tunnel designs will be tested in accurate virtual models allowing for valuable driver feedback and performance data collection on Cruden’s state-of-the-art 3Ctr 6-DOF motion racing simulator which is soon to be operational at Swift.
“Speed-to-market is critical in any business, but probably more so in racing as the green flag doesn’t wait for anyone,” Refsdal said. “Rapid development is just as much about the speed and quality of the design process as it is manufacturing. We are evolving our four-year exclusive certified composite repair relationship with Mark One Composites, Inc. to provide further manufacturing and inventory support directly to teams from its Indianapolis-based facility.”
2010 Chevrolet Suburban 75th Anniversary Diamond Edition Debut in Chicago
2010 Chevrolet Suburban 75th Anniversary Diamond Edition – 11.02.2010
75 years in the making
To celebrate the Suburban’s 75th anniversary, Chevrolet has unveiled the Suburban Diamond Edition at the Chicago Auto Show.
Based on the Suburban LTZ, the special edition features a White Diamond paint job, a new roof rack, special badging, and unique 20-inch chrome wheels.
Inside, the Suburban has cashmere leather upholstery, ‘Diamond Edition’ sill plates, and embroidered front headrests. Other goodies include heated and cooled front seats, GPS navigation, a rearview camera, adjustable pedals, and Bluetooth connectivity.
The Diamond Edition will go on sale this summer and production will be limited to 2,570 units
(including 350 for Canada and other export markets).
Source: GM
Press Release (Click to expand)
Chevrolet Commemorates 75 Years Of The Suburban With New Diamond Edition
CHICAGO – Chevrolet announced the new 2010 75th Anniversary Diamond Edition Suburban to commemorate the pioneering SUV’s production milestone. It is the first vehicle in the industry to achieve 75 years in production.
“At Chevrolet we’re gratified with the customer acceptance of the Suburban, providing the room and utility they want for 75 years running,” said Jim Campbell, Chevrolet general manager. “We look forward to many more years of being the vehicle of choice for families and consumers who desire maximum utility.”
The 75th Anniversary Diamond Edition Suburban goes on sale early this summer and is limited to 2,570 units (including 350 for Canada and other export markets). It is distinguished by a White Diamond Tricoat exterior color and Cashmere interior, along with unique 20-inch chrome-clad wheels and new roof rack rails. Special badging adorns the C-pillar sail panel and steering wheel center cap, while “Diamond Edition” lettering is used on the sill plates and is embroidered on the front headrests.
The anniversary models are equipped with LTZ content and are offered in 1500 2WD or 4WD configurations. The LTZ content includes a comprehensive package of safety-minded technology, including an integrated navigation radio and a one-year subscription of XM Satellite Radio with NavTraffic, Bluetooth phone connectivity, a rearview camera system, rear parking assist, remote starting and adjustable pedals.
Leather-covered seating is standard, with heated seating for the first two rows. Heated and cooled seats are standard on the first-row seats. Optional equipment includes a DVD-based rear-seat entertainment system, articulating running boards, a sunroof and Side Blind Zone Alert. Mobile WiFi can also be added at the dealership.
75 years of capability
The content of the 75th Anniversary Diamond Edition Suburban is unique, but it’s built on a foundation of strength and capability that has propelled the brand for more than seven decades. Inside, the Suburban seats up to nine, while offering 45.8 cubic feet (1,297 L) of cargo space behind the third row. With the second-row seats folded and third-row seats removed, interior cargo space increases to 137.4 cubic feet (3,891 L).
A Vortec 5.3L FlexFuel engine and fuel-saving six-speed automatic transmission are standard in Suburban half-ton models, enabling a maximum towing capacity of 8,100 pounds (2,674 kg). Suburban 2500 models offer a 6.0L/six-speed powertrain combination and a maximum towing rating of 9,600 pounds (4,354 kg).
“Its capacity to haul passengers, their cargo and trailers all at once is what has made Suburban an institution among families, small businesses and large fleets,” said Campbell. “Time and again they return to the vehicle that meets all their needs – and for the past 75 years, it’s been Suburban.”
Subscribe to:
Posts (Atom)